# Marine GPS & GNSS Systems: Installation and Troubleshooting

> Marine GPS and GNSS installation, ECDIS and AIS integration and troubleshooting for commercial vessels, with engineers in the Netherlands and Türkiye.

URL: https://satcenter.tv/marine-gps-gnss-systems/

Reliable positioning and navigation systems for commercial vessels. Satcenter engineers in the Netherlands and Türkiye install, integrate and repair marine GPS and GNSS equipment for customers across Europe and the Middle East.

## Reliable positioning for safe navigation
**Accurate positioning is essential for safe navigation at sea. Marine GPS and GNSS systems provide vessel position, speed, course and timing information to critical navigation and communication equipment onboard.**

Satcenter provides technical support for marine GPS and GNSS installations, system integration and troubleshooting. With engineers based in the Netherlands and Türkiye, we support maritime customers across Europe and the Middle East.

Whether you are upgrading an existing navigation system, replacing a GPS receiver or experiencing positioning problems onboard, Satcenter can assist with your technical requirements:

- New GPS and GNSS receiver installations and replacements
- Antenna installation, cabling and connector repairs
- Data integration with ECDIS, AIS, radar, GMDSS and VDR
- Fault finding when position, speed or time data is missing or wrong

## Our marine GPS and GNSS services
From a single receiver replacement to the full positioning setup of a bridge, one team handles the installation, the connections and the testing.
- **GPS installation**: Receiver and antenna installation, cable routing and termination for new systems, replacements and upgrades.
- **Bridge integration**: NMEA 0183, NMEA 2000, IEC 61162 and Ethernet connections to ECDIS, AIS, radar, GMDSS and VDR.
- **Commissioning**: Configuration, data distribution checks and verification of position, speed and time before handover.
- **Troubleshooting**: Onboard diagnosis of lost position, unstable fixes, wrong data on connected systems and hardware faults.
- **SOLAS compliance**: Equipment selection and installation with SOLAS Chapter V, IMO performance standards and flag requirements in mind.
- **Interference resilience**: Multi-system receivers and integrity monitoring to reduce the impact of GPS jamming and spoofing.

## Marine GPS and GNSS navigation systems
Marine GPS is an essential component of modern bridge navigation systems. It receives signals from navigation satellites to determine the vessel's geographical position and provide accurate navigation information.

While GPS refers specifically to the United States satellite navigation system, GNSS (Global Navigation Satellite System) is the broader term covering several satellite constellations, including:

- **GPS:** Global Positioning System of the United States
- **Galileo:** European satellite navigation system
- **GLONASS:** Russian satellite navigation system
- **BeiDou:** Chinese satellite navigation system

Modern marine GNSS receivers can use multiple satellite constellations to improve satellite availability and positioning reliability. More visible satellites mean a more stable fix, better geometry and a backup when one system is degraded.

The information generated by these receivers can be distributed to other onboard navigation and communication systems, which is why a correct installation matters for the whole bridge and not only for the GPS display itself.

## Marine GPS installation and commissioning
Correct installation of a marine GPS or GNSS system is important for reliable navigation data throughout the vessel.

Installation involves more than mounting a receiver and connecting an antenna. Antenna positioning, cable routing, power supply, equipment configuration and communication with other bridge systems all influence performance.

### Depending on the equipment and project, the work may include

- GPS and GNSS receiver installation
- GPS antenna installation and replacement
- Antenna cable routing and termination
- Power supply and connection checks
- NMEA 0183 and NMEA 2000 interface connections
- IEC 61162 and Ethernet-based data integration
- GPS data configuration and distribution
- Position, speed and time verification
- Functional testing and commissioning

Correct integration helps ensure that connected navigation systems receive valid and consistent positioning information.

## GPS integration with ECDIS, AIS and other navigation equipment
A marine GPS receiver often supplies important navigation data to several systems onboard. These may include:

- **ECDIS:** uses position information to display the vessel's location on electronic navigational charts and support route monitoring.
- **AIS:** uses positioning information as part of the vessel data transmitted to other ships and shore stations.
- **Radar:** may use GPS-derived position, speed over ground and course over ground information for supported navigation functions.
- **GMDSS:** compatible distress communication equipment can use GNSS data to include the vessel's position in emergency alerts.
- **VDR:** records relevant navigation data, including available position information.

Because multiple systems can depend on the same positioning source, GPS faults or incorrect data distribution can affect several bridge systems simultaneously. When we install or repair a receiver, we therefore check the data on every connected system, not only on the GPS itself.

Related services: [ECDIS installation and commissioning](https://satcenter.tv/ecdis-installation-commissioning/) and [GMDSS systems](https://satcenter.tv/iridium-gmdss/).

## SOLAS requirements for marine GPS and GNSS equipment
Marine positioning equipment plays an important role in meeting international navigation safety requirements.

Under **SOLAS Chapter V, Regulation 19.2.1.6**, ships within the scope of the regulation must have a suitable means of automatically establishing and updating their position throughout the intended voyage. This may be achieved through an appropriate GNSS receiver, terrestrial radionavigation equipment or another acceptable positioning solution.

**SOLAS Chapter V, Regulation 18** also addresses type approval and applicable performance standards for required navigational equipment.

### Relevant IMO standards

- **IMO Resolution MSC.112(73):** performance standards for shipborne GPS receiver equipment.
- **IMO Resolution MSC.401(95):** performance standards for multi-system shipborne radionavigation receivers.

Equipment selection and installation should take account of the applicable SOLAS requirements, flag State regulations and relevant approval standards. The exact requirements may depend on the vessel, its operating area and the flag Administration.

## GPS signal interference, jamming and spoofing
Reliable satellite positioning is increasingly important as modern navigation systems become more interconnected. However, satellite navigation signals can be affected by interference.

### Two important risks

- **GPS jamming:** radio interference that prevents or reduces the receiver's ability to obtain reliable satellite positioning information.
- **GPS spoofing:** the transmission of misleading satellite-like signals that may cause a receiver to calculate an incorrect position or time.

These disruptions can affect navigation equipment that relies on GNSS data, such as ECDIS, AIS and GMDSS.

Using suitable multi-system receivers, monitoring position integrity and maintaining appropriate independent navigation methods can help improve operational resilience.

## Marine GPS and GNSS technical support
Satcenter supports shipowners, ship managers, maritime equipment suppliers and technical management companies with onboard engineering services.
- **Onboard experience**: Practical experience in marine communication, onboard networks and bridge equipment integration.
- **Rotterdam and Türkiye**: Engineering resources in the Netherlands and Türkiye, supporting vessels across Europe and the Middle East.
- **Port call planning**: Service attendance coordinated with port calls, scheduled maintenance and vessel upgrades.
- **One point of contact**: Clear communication with the superintendent and the crew, from the first question to the test report.

## Common GPS problems onboard
Positioning problems usually show up first as alarms on ECDIS or AIS. Our engineers check the complete chain from antenna to every connected system to find the real cause.

- **No position or lost fix:** damaged antenna, water in connectors or a broken coax cable
- **Unstable or jumping position:** poor antenna location, interference from nearby transmitters or degraded signals
- **Data missing on one system:** wrong interface settings, baud rate or sentence configuration
- **Alarms on several systems at once:** a failed distribution unit, splitter or power supply
- **Wrong time or date:** receiver configuration or firmware issues

The same engineers also support [navigation and communication systems](https://satcenter.tv/navcom/), [Starlink](https://satcenter.tv/starlink-maritime-installation/) and [VSAT](https://satcenter.tv/maritime-vsat-solutions/) connectivity, so several jobs can be combined in one port call.

## Marine GPS and GNSS: frequently asked questions
### What is the difference between GPS and GNSS?

GPS is the United States satellite navigation system. GNSS is the general term for all satellite navigation systems, including GPS, Galileo, GLONASS and BeiDou. A multi-constellation GNSS receiver can use several of these systems at the same time.

### Which systems on the bridge use GPS data?

Typically ECDIS, AIS, radar, GMDSS equipment and the VDR. Depending on the vessel, other systems such as the autopilot or onboard satellite communication terminals may also use GNSS position or time.

### Is a GNSS receiver required under SOLAS?

SOLAS Chapter V, Regulation 19.2.1.6 requires ships within its scope to have a means of automatically establishing and updating their position throughout the voyage. A type-approved GNSS receiver is the usual way to meet this, subject to flag State requirements.

### Can you replace our GPS receiver without changing the other equipment?

In most cases, yes. We check the existing interfaces and data formats, connect the new receiver to the existing systems and verify that ECDIS, AIS, radar and the other connected equipment receive correct data.

### How can the impact of GPS jamming and spoofing be reduced?

Multi-system receivers, position integrity monitoring and independent navigation methods such as radar, gyro and visual fixes all help the crew detect and handle disturbed satellite signals.

## Contact

Email: info@satcenter.tv · Phone: +31 85 560 71 20 · https://satcenter.tv/contact
